G.I.T. security products
Languages
English francais
 

POWERstart PS-2015-TW-LED
[PS-2015-TW-LED]

 

Long range FM two way LED remote engine starter.
Alarm and starter kill built-in.
Push to start and Hybrid vehicle ready.
Automatic or manual transmission vehicle selectable.
Wired TACH mode, TACHLESS mode, Time crank mode selectable.
TACH learning mode.
Keyless entry, trunk openner, Sliding door via transmitter.
Active or passive Arming/Lock mode selectable.
Keyless running mode.
Panic function via transmitter.
Turbo engine vehicle compatible.
2 way iDatalink and 1 way Fortin port connector for transponder bypass or CANBUS module ready.
4 Auxilary programmable output for optionnal accesories.
Firmware updatable.
OUTPUTS

1 x Positive output 30/40A built-in relay for IGNITION.
1 x Positive output 30/40A built-in relay for ACCESSORY.
1 x Positive output 30/40A built-in relay for STARTER.
1 x Positive output 30/40A built-in relay programmable (2nd IGNITION, 2nd ACCESSORY, 2nd STARTER, parking lights, or trunk openner).
2 x Positive or Negative output 10A built-in relay programmable (starter-kill, parking lights, trunk, ect..)
1 x Negative output 250mA for IGNITION.
1 x Negative output 250mA for ACCESSORY.
1 x Negative output 250mA for STARTER.
1 x Negative output 250mA for door lock (programmable pulse).
1 x Negative output 250mA for door unlock (programmable pulse).
1 x Negative output 250mA for factory alarm rearm (programmable pulse).
1 x Negative output 250mA for factory alarm desarm.
1 x Negative output 250mA for starter-kill (programmable).
1 x Negative output 800mA for trunk openner (programmable).
1 x Negative output 800mA for parking lights (programmable).
2 x Negative output 800mA for Ground when running.
1 x Negative output 800mA for horn or siren (programmable pulse).
4 x Negative output 250mA for AUX channel(programmable).


INPUTS

1 x Negative input for door status.
1 x Positive input for door status.
1 x Negative input for trunk status.
1 x Negative input for hood status.
1 x Negative input for Hand brake status.
1 x Positive input for brake status.
1 x AC/DC input for TACH signal.

1 x DATA port connector for Transponder bypass and CANBUS module (Idatalink & Fortin selectable).
1 x Shock sensor input connector.
Welcome Guest!